The material used is a multi-layer self-adhesive polymer composite, the adhesive. Prevention of rust, cold, and thermal insulation. The material used is a multi-layer self-adhesive polymer composite, the adhesive. Prevention of rust, cold, and thermal insulation.

• For roofs in poor condition, whether due to rust, wear, or leaks. Using this product can effectively renovate the roof and prevent the problem of metal roof aging.
• After use, it will have a significant waterproofing, soundproofing, and thermal insulation effect, preventing direct ultraviolet rays, acid rain from hitting the metal roof directly, etc.
• During the installation process, it does not affect indoor production operations, and you can still walk around it after installation is complete without fear of stepping on it.
• Summer heat insulation: It can block external heat sources, provide a comfortable working environment indoors, effectively reduce air conditioning electricity consumption, and lower costly electricity bills.
• Heat preservation in winter: it can prevent indoor temperature leakage. It is not necessary to use an electric heater (or use it for a short time) to achieve the heat preservation effect. This can bring energy savings and low-carbon environmental protection to the social environment.

It measures 5 meters long and 1 meter wide. Only $23.00.

Installation steps:

1. Clean the roof of dirt and mud and keep it dry.
2. To install from the lowest point on the eaves.
3. Remove the back film
4. Press the membrane from the center toward both sides.
5. Remove the remaining part of the insulating film.
6. Press down with your feet
7. The top and bottom membranes overlap each other by 10 cm.
8. If there is a raised section, a second piece is needed to cover the corrugated section.